VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > INDUSTRIAL COATINGS > ETCH PRIMER
Email A Friend
QUANTITY
-
+
PPG
1833 ultra etch | 4 litre
1833-9444
PRODUCT DESCRIPTION

A single pack, chromate-free, anti-corrosive etch primer. Use gives excellent adhesion and protection to various metals, under various topcoats.

For interior / exterior use.

Spray apply: 50-70 microns Wet Film Thickness to achieve 8-12 microns Dry Film Thickness.

Overcoat the same day (no sanding), after a minimum 1 hour.

Overcoat with 295, 600, 279, 579, PSX1015. For maximum corrosion resistance, apply intermediate primer between etch and topcoat.

Thinning and Clean Up: Thin with 20% 654 Etch Thinner. Clean gun and equipment.

Drying: Touch dry: 20 minutes. Hard dry: 1 hour. Overcoat: 1 hour minimum, 24 hours maximum.

Do not bake, as this may affect the intercoat adhesion.

DOWNLOADS
SDS
STOCK AVAILABLE
NZD $139.38
ADD TO CART
Grey
Beige
Black
Back to Top