VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > INDUSTRIAL COATINGS > 488 AMERCOAT
Email A Friend
QUANTITY
-
+
PPG
488 amercoat - black | 4 litres
0488A-09446/4L
PRODUCT DESCRIPTION

Product Data

  • High performance, corrosion resistance
  • Specifically designed for topcoating with PSX range of topcoats
  • Fast drying, fast curing epoxy composition
  • Self-priming .
  • No lead pigments added
  • Phthalate and phenol free.

Amercoat 488 forms an excellent corrosion barrier and is suitable for most industrial new construction, repair and field maintenance applications. Amercoat 488 is user-friendly and can be applied by a variety of spray application methods. Amercoat 488 can be applied direct to clean steel as a barrier coat for mild non-aggressive environments.

Typical Uses

As a primer coat for applications requiring PSX topcoat products. Tank exteriors, structural steel and piping in chemical plants, refineries, pulp and paper mills, bridges, power stations, offshore platforms, ballast tanks service, and other structures exposed to severe weathering or salt sp

Application Data

Applied over: Primed or prepared steel

Method Airless or conventional spray

Mixing ratio (by volume) 4 parts 488A to 1 part 488B

Application Procedure

Amercoat 488 is packaged in two components in the proper proportions which must be mixed together before use.

1. Flush equipment with thinner before use.

2. Stir each component thoroughly, then combine and mix until uniform.

3. If thinning is necessary for workability, add 470T or 470TS. Thin in quantities 5-20% as required.

DOWNLOADS
Technical DS
STOCK AVAILABLE
NZD $207.16
ADD TO CART
4 Litres
RELATED PRODUCTS
0470T Thinners | 4 Litres
Amercoat 488 Part B - Hardener | 1 Litre
Back to Top