VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > SPRAY EQUIPMENT > FILTERS AND REGULATORS
Email A Friend
QUANTITY
-
+
GROZ
3/8in bsp air filter-regulator-lubricator unit
GZ60406
PRODUCT DESCRIPTION

GZ60406 - GROZ Air Filter-Regulator-Lubricator Combination Unit - 63CFM/1800LPM

Space saving 2-pc Modular Filter-Regulator Combination & Lubricator is by far the most popular Air Preparation unit.

The Filter-Regular Combination & Lubricator are attached in series using spacers & piping adapters which makes the 2 components easily removable / mountable without disturbing the pipe line. Come complete with a wall mounting bracket.

Air Filter is used to separate dust dirt moisture & other contaminants from compressed air. Filter has a Die Cast Aluminium body, polycarbonate bowl with a steel bowl guard & a high performance Sintered Bronze Filtering element. Filter is designed with a Separator & shield for efficient moisture separation.

Regulator maintains a steady outlet pressure unaffected by variations/ fluctuations in the inlet pressure. Regulators have a Non-Raising "Press to Lock'' adjusting knob for locking at any set pressure. Regulators work on a Diaphragm operated relieving type mechanism with pressure compensated by balanced poppet.

Air Lubricators are used to feed lubricants to pneumatic equipments. These maintain a constant oil-to-air density over a wide range of flow. Lubricators are Fog/Micro Mist type upto 15m / 50ft pipe runs. Designed for best performance with 32 grade oil. These have a Die Cast Aluminium Head,  polycarbonate bowl with a steel bowl guard. The head is fitted with Oil drop indicator, Oil drop controller & Oil filling plug.

  • Pressure adjustment range of 7 - 145 PSI (0.5 - 10 BAR)
  • 40 micron filtering element.
  • Press Type Manual Drain with Night Time Drain feature which automatically drains off the bowl once the compressed air supply to the filter is switched off.

WETTED COMPONENTS: Aluminium, Bronze, Brass, Steel, Acetal, Polycarbonate, Stainless Steel & Nitrile.

  • FRCLM-14 INTERMEDIATE COMPLETE WITH 42MM GAUGE
  • Max flow rate: 63 CFM / 1800 LPM
  • Min flow rate: 1.41 CFM / 40 LPM
  • Bayonet type steel bowl guard, Regulator with in-built Venturi for Flow Compensation.

CONFORMS TO ISO 6953-1 5782-1 & 6301-1

WARNING: Polycarbonate bowls may get damaged and possibly fail if exposed to synthetic oils thinner solvents trichloroethylene kerosene or other aromatic hydrocarbons.

STOCK AVAILABLE
NZD $191.02
ADD TO CART
RELATED PRODUCTS
3/8IN BSP Regulator - 88CFM/2500LPM
3/8IN BSP Air Filter - 80CFM/2250LPM
3/8IN BSP Oil Mist Lubricator - 106CFM/3000LPM
3/8IN BSP Air Filter-Regulator Unit - 77CFM/2200LPM
1/2IN BSP Air Filter-Regulator-Lubricator Unit
1/4IN BSP Air Filter-Regulator-Lubricator Unit
Back to Top