VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > AUTOMOTIVE COATINGS > 1K PRIMERS
Email A Friend
QUANTITY
-
+
PPG - CT
1k ct etch primer - grey | 1 litre
466-48394/1L
PRODUCT DESCRIPTION

CT Etch Primers are single component, chromate free, general purpose acid etching, air-dry primers. They are recommended for use on Commercial Transport vehicles and component painting.
They have good adhesion and give corrosion protection to a variety of substrates. These include aluminium, steel, galvanised steel and speciality steel substrates such as Zincalume and Zinanneal.

One pack chromate-free product. Multi-substrate compatibility. Acid etching characteristics. Air dry and wet-on-wet capability. Excellent application properties. Based on tough epoxy resin. Multi-topcoat compatibility.

Features:
Easy to use, less harmful product. One product required/reduced stock holding. Good adhesion to a range of substrates. High productivity and topcoat holdout. Good coverage, flow and appearance.
Good corrosion resistance and mechanical properties. Use under 1K & 2K topcoats.

Ideal Use:
Air dry: 30 minutes minimum at 25oC before denibbing and/or overcoating. For optimum performance, air dry 2 hours or overnight at 25oC before denibbing and/or overcoating. 1-2 even wet coats to give a dry film build of 20-40 mm.

DOWNLOADS
Spec SheetSDS
STOCK AVAILABLE
NZD $45.00
ADD TO CART
1 Litre
4 Litres
20 Litres
Back to Top