VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > SPRAY CANS > FROSTED GLASS
Email A Friend
QUANTITY
-
+
RUST-OLEUM
frosted glass | 312g
1903830
PRODUCT DESCRIPTION

Rust-Oleum� Frosted Glass Spray creates an etched glass appearance but permits light to transmit through the painted surface. It is designed for use on glass doors, windows,skylights, shower doors, and greenhouses. For a decorative effect, use a stencil to create an etched look on mirrors, shower door exteriors, glass accessories, and more. Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16� from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can in motion while spraying. Apply two or more wet coats a few minutes apart for best appearance. A wet coat should appear shiny as it is applied to the surface. WAIT 10 MINUTES FOR FROST EFFECT. Not for outdoor use. Do not use near open flame.

DRY & RECOAT TIMES
Dry and recoat times are based on 70�F and 50% relative humidity. Allow more time at cooler temperatures. Dries completely in 5-10 minutes. May recoat anytime.

CLEAN-UP
When finished spraying, clear spray valve by turning can upside down and depressing spray button for 3-5 seconds (some paint will be sprayed out, so be careful to not inadvertently spray yourself or other objects). Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in home trash compactor.

CLOGGING
If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening. 

STOCK AVAILABLE
NZD $16.91
ADD TO CART
312g
Back to Top