VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > SPRAY CANS > HIGH HEAT SURFACES
Email A Friend
QUANTITY
-
+
RUST-OLEUM
high heat - satin black | 946ml
7778502
PRODUCT DESCRIPTION

*Colours displayed are only close estimations of the true colour

High Heat Ultra is a rust preventive enamel designed to provide deep colour and rich sheen to protect indoor and outdoor high heat applications. This durable semi-gloss finish retains excellent gloss and colour retention after repeated heating. High Heat sprays withstand temperatures up to 1200�F (648�C). Ideal for the exterior of barbeque grills, wood stoves, radiators, fire pits, fireplace screens, automotive parts, and more. Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can upright 10-16� from surface and spray in a steady back-and forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface and x5in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame.

DRY & RECOAT TIMES
Dry and recoat times are based on 70�F and 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 30 minutes and to handle in 1-2 hours. Allow paint to dry for 1 hour before heating. Product may emit smoke and harmless odour. May recoat within 1 hour or after 48 hours.

CLEAN-UP
Clean valve immediately after use by turning can upside down and depressing spray button for 3-5 seconds. Clean-up wet paint with xylene or mineral spirits. Properly discard empty container. Do not burn or place in home trash compactor.

CLOGGING
If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening.

 


STOCK AVAILABLE
NZD $59.95
ADD TO CART
236mL
946mL
RELATED PRODUCTS
High Heat - 340g | White
Back to Top