VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > RESIN, FILLERS AND SEALERS > FLOW COAT
Email A Friend
QUANTITY
-
+
NORSKI
white flow coat and hardener | 250g
FCW250FCC250
PRODUCT DESCRIPTION

Polyester Flow-Coal is a modified ISO Polyester resin which is a hard, durable chemical and solvent resistant coating with excellent weathering properties. It can be used to provide single colour, highly decorative surfaces. It cures rapidly and therefore can normally be handled within an hour of application, however this is dependent on temperature

Areas of Use:
As a coating for compressed hardwood, chipboard, fibreglass, bricks,
cement, rigid plywood and many other products. Decorative and/or protective coating for interior and exterior walls. Can be used to cover walkways, selected building materials. Can be used virtually anywhere a paint is used.

Chemical Resistance:
Acids - very good; Solvents - good; Alkalis - good; Fresh Water - excellent; Sea Water - excellent.

Application:
Polyester Flow-Coat requires the addition of a Hardener (MEKP), mixing ratio is 1-2%. hardener to Base. Where a surface is highly porous, apply a base/primer coat. This can be manufactured by diluting Polyester Flow-Coat with polyester thinners by 15%. Allow 24 hours between coats.

Surface Preparation:
The surface that the Flow-Coat is to be applied to must be dry and free from all dust, dirt, oil and foreign materials. Polished and glass materials are not recommended as suitable surfaces. All spills should be cleaned up as they occur, for thorough cleaning use Norski Cleaning Fluid.



STOCK AVAILABLE
NZD $20.50
ADD TO CART
1kg
2kg
6kg
250g
500g
Back to Top