VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > POR 15 AND HAMMERITE > HAMMERITE HAMMERED
Email A Friend
QUANTITY
-
+
HAMMERITE
metal paint hammered | silver - 250ml
PAIH-025S
PRODUCT DESCRIPTION

*Colours displayed are only close estimations of the true colour

HAMMERITE HAMMERED FINISH Durable, corrosion resistant decorative coating for ferrous and non-ferrous metals, certain plastics and wood. Decorative hammered appearance is smooth to the touch and sheds water well. Can be applied directly onto rusty metal. No need for primer or undercoat. Corrosion resistant. Hammerite forms a superior barrier that not only seals out moisture but gives long lasting protection both inside and outside. Abrade smooth surfaces and remove all loose rust and flaking paint with a wire brush. Remove dirt, dust and grease with diluted detergent. Rinse with clean water and allow time to dry. Paint a test patch of Hammerite Direct to Rust Metal Paint Hammered onto painted surfaces and leave for 1 hour. If there is no reaction apply Hammerite Direct to Rust Metal Paint Hammered directly to surface. If there is a reaction, remove all paint before applying Hammerite Direct to Rust Metal Paint Hammered. On bare zinc, aluminium and galvanised surfaces apply Hammerite Special Metals Primer before applying Hammerite Direct to Rust Metal Paint Hammered. Ideal application temperature 8-25degC. Lightly stir before use. Do not mix vigorously.

Do not mix paint from 2 tins or mix colours. Brush application: Do not thin. On previously painted metal in sound condition, 1 coat should be sufficient. On bare/rusty metal 2 coats are required. Ensure that all edges and corners are adequately covered. Do not over-apply as sagging will occur. Coventional spray application: Thin with Hammerite Brush Cleaner & Thinners at a ratio of 15% Thinners to Paint. Set spray gun at 25/35psi and use full fan spray at maximum volume. Apply 4 thin coats. Allow 1 hour between coats. Refer to spray equipment manufacturer's guidelines for the correct and safe use of sprayers. Touch dry 1-2 hours, recoatable after 4 hours After use, remove as much paint as possible from brushes before cleaning with Hammerite Brush Cleaner & Thinners.


DOWNLOADS
Spec Sheet
STOCK AVAILABLE
NZD $21.05
ADD TO CART
2.5 Litres
250mL
400mL (A)
750mL
Silver
Black
Blue
Copper
Dark Green
Gold
Red
White
RELATED PRODUCTS
Metal Paint Hammered | White - 400mL
Back to Top