VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > AUTOMOTIVE COATINGS > 1K CLEARCOATS
Email A Friend
QUANTITY
-
+
PPG
autothane 1k diamond clearcoat | 4 litres
526-49594/4L
PRODUCT DESCRIPTION

An exceptional acrylic lacquer clearcoat which combines excellent application and polishing properties and a durable finish.

Product Data and instructions for use are as below and on the product's label.

Preparation of Substrate: 
Autothane 1K Diamond Clearcoat can be applied over suitably prepared original panels during blending wth Dulon Basecoat or Solid Colour. After 20-30 minutes air flash at 25 degrees. Please note: Substrates other than those stated should be tested before use, to ensure that the performance of the product is suitable for the intended use.

Application:
For complete panel or overall respray apply 3 - 4 full even coats. Air flash between coats. For part panel or spot repair, apply as for complete panel, extending each coat beyond the edge of the previous coat. Add up to a further 50% thinner to aid blending. Flash Off at 20 degrees 3-4 mins between coats at 20 degrees.

Drying Times: 
Air Dry @ 20 degrees; Dust Free 10-15 minutes at 20 degrees. Compound 6 hours at 20 degrees.

Please Note: Drying times will need to be extended under cooler conditions. Seek further advice before spraying. 

STOCK AVAILABLE
NZD $101.48
ADD TO CART
1 Litre
2 Litres
4 Litres
500mL
RELATED PRODUCTS
Two Way Thinner | 4 Litres
Back to Top