VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > WORKSHOP EQUIPMENT > PANEL REPAIR
Email A Friend
QUANTITY
-
+
 
h9 induction heater
H9
PRODUCT DESCRIPTION

_
RENT THIS 
From $25.09 Per Week

FINANCE THIS  From $35.28 Per Week

Give us a call if this sounds like you: 04-586 6681
_

The H9 Induction Heater is a high performance induction heating system. This breakthrough equipment technology uses high frequency magnetic fields to heat-release adhesives bonded to metal in just seconds.
The H9 Induction Heater will also let you release front and rear windscreens, decals, mouldings, vapour barriers, sound deadening pads, name plates and badges that are bonded to the vehicle. It allows you to release frozen bolts and nuts by heating them to red hot in seconds. In addition to these features, soft dents and hail dents can also be easily removed using the dent removal attachment where the dent is gently heated to release it without damaging the paint.

Different alert sounds inform the operator which status (working or warning).
The power unit can be removed from the trolley by releasing the quick lock fastener. This allows the technician to work in hard to get at places such as turrets and the interior of the vehicle.
The MCU control, a feature of the H9, can detect which heating accessory is being used and set the corresponding output current automatically. The setting can also be adjusted manually to increase or decrease the time and power.
Has two operating switches. Each heating accessory has its own ON/OFF switch and an pedal switch is also provided.
Three custom operations can be stored on the panel. This allows the operator to retrieve the saved operation at any time.
Air cooled by two internal fans to disperse any heat build-up.

Image 1 - Body Inductor:
The body inductor is used to release the adhesive on mouldings, strips, graphics, vapour barriers, sounds pads, name plates/emblems. It can also be used to stress relieve sheet metal.

Image 2 - Nut Inductor: 
The nut inductor allows you to heat frozen bolts and nuts red hot (1400 F) in seconds. This safe and fast way eliminates the use of an oxyacetylene torch.

Image 3 - Hail/dent Inductor: 
The hail/dent inductor allows you to release soft dents by gently heating the panel and relieving the stress holding the dent. This paintless removal saves time and money compared to the coventional method.

Image 4 - Frame Inductor: 
The frame inductor can heat 5mm steel red hot (1400 F) in seconds. Heating in sensitive areas can be done without burning or damaging wiring and other parts.

Image 5 - Glass Inductor: 
The glass inductor allows the removal of bonded glass. The inductor is moved around the outside of the glass until the bondinf adhesive is melted. Wedges are placed under the glass to help with its release. The bonding materila is completely removed from the metal pinch weld leaving the surface free. 

Model: H9
Input: (@ rated output)
Input voltage: 230V; 50/60Hz; 1ph
Input current:15A
Output: (maximum values to induction coil)
Power: 1500/4000W
Voltage: 400V; 45-60kHz; 1ph
Current: 80A
Cooling: 2 fans
Size: L600 x W450 x H900mm
Weight: 29kg

STOCK AVAILABLE
NZD $3,392.50
ADD TO CART
Back to Top