VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > SPRAY CANS > APPLIANCE EPOXY
Email A Friend
QUANTITY
-
+
RUST-OLEUM
appliance epoxy - silver | 340 grams
7887830
PRODUCT DESCRIPTION

*Colours displayed are only close estimations of the true colour

Appliance epoxy is a hard, moisture resistant enamel that is specifically formulated for indoor metal surfaces. It provides a smooth, washable surface for refinishing the exterior of appliances such as refrigerators, dishwashers, laundry machines, dryers and other indoor metal applications such as tables or cabinets.

SURFACE PREPARATION 
Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with wire brush or sandpaper. Lightly sand glossy surfaces.

APPLICATION 
Apply only when air and surface temperatures are between 50- 90�F (10-32�C) and the relative humidity is below 85% to ensure proper drying. Avoid spraying in very windy or dusty conditions. Cover surrounding area to protect from overspray. Overspray can carry a significant distance. Shake can vigorously for one minute  after the mixing ball begins to rattle. Shake often during use. Hold can upright 12-16" from surface and spray in a steady back-and forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply several light coats a few minutes apart to avoid drips and runs. Do not use near open flame. 

CLEAN-UP
Clean valve immediately after use by turning can upside down and depressing spray button for 3-5 seconds (some paint will be sprayed out, so be careful to not inadvertently spray yourself or other objects). Clean up wet paint with xylene or mineral spirits. Throw away empty can in trash pick-up. Do not burn or place in compactor. proper drying. Avoid spraying in very windy or dusty conditions. Cover surrounding area to protect from overspray. Overspray can carry a significant distance. Shake can vigorously for one minute after the mixing ball begins to rattle. Shake often during use. Hold can upright 12-16" from surface and spray in a steady back-and forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply several light coats a few minutes apart to avoid drips and runs. Do not use near open flame.

STOCK AVAILABLE
NZD $25.22
ADD TO CART
Silver
White
Back to Top