VIEW CART
NZD $0.00
(0)
LOG IN 
HOME > INDUSTRIAL COATINGS > 779 CAPRINAMEL
Email A Friend
QUANTITY
-
+
PPG
779 caprinamel - group 3 | 4 litres
0779A-GRP3/4L
PRODUCT DESCRIPTION

CAPRINAMEL is a two pack polyurethane spraying enamel with the following features:

  • Hard, high gloss finish in a range of colours.
  • Very good exterior durability.
  • Resistant to a wide range of chemicals and cleaning agents.
  • Excellent abrasion resistance.
  • Good solvent resistance.

The hardener is based on aliphatic polyisocyanate.

Mixing Ratio: Mix 4L 0779A CAPRINAMEL Base with 1L 0779B

Uses: For use on structural steel, agricultural equipment, trucks, buses; surfaces where a durable, chemical resistant, easily cleaned surface is required.

Substrates

Steel and ferrous alloys, suitably primed.

Aluminium / galvanised steel - MUST be preprimed with 719 Polyetch.

Sanded original baked enamel or 2K enamel in good condition.

Drying

Dust free - 25 minutes

Print free - 1 hour

Dry to tape - 24 hours

Hard dry - 24 hours

Cut and polish - 36 hours to 7 days (depends on ambient conditions).

Recoat time - Wet on wet, under 2 hours OR over 24 hours with sanding.

DOWNLOADS
Spec Sheet
STOCK AVAILABLE
NZD $173.44
ADD TO CART
1 Litre
4 Litres
RELATED PRODUCTS
779B Hardener | 1 Litre
Back to Top