2K Colour Mixed | 250mL
If you know the colour you are after, put all the colour information (colour code, etc) we need to mix it up for you in the Notes section at Checkout. If you are unsure please get in touch with us.
A high quality two pack acrylic urethane topcoat that provides high gloss off the gun, excellent opacity, excellent appearance, hardness and durability.
Preparation of Substrate:
2K Solid Colour can be applied over:
- Sound existing paint finishes which have been degreased with Prepsol and sanded with P400 dry or P600 wet.
- 2K Primer Fillers/Sealers (467 Line) and 2K HS Tintable Wet Primer (P565-358).
- Premium 1K Primer Filler when used for small spot repairs.
- Do not apply 2K Solid Colour directly over etch primers.
Please note: Substrates other than those stated should be tested before use to ensure that the performance of the product is suitable for its intended use.
Mixing By Volume:
426-line Colour - 2 vols
Hardener - 1 vol
Thinner - 10-20% vol
Application: 2-3 medium, wet, even coats
Flash Off: 3-5 minutes between coats at 25'C
Air Dry: Handle able 12 hours at 25'C Polishing 24 hours at 25'C
Bake: 40 minutes at 65'C; Drying times will need to be extended under cooler conditions. Seek further advise before spraying.
Infra Red: Times will vary depending upon equipment. Refer to equipment supplier.
Technical Data: Total Dry Film Build: 45-60 microns with 2–3 coats
Overcoat/ Recoat Time:
Recoatable with itself within 1-2 hours
If rectifying, allow 16 hours air dry at 25'C or bake first.