Autothane 1K Diamond Clearcoat 1 Litre
An exceptional acrylic lacquer clearcoat which combines excellent application and polishing properties and a durable finish, for oversealing basecoats or when extra depth of colour is required.
Preparation of Substrate:
Autothane 1K Diamond Clearcoat can be applied over suitably prepared original panels during blending with Dulon Basecoat or Solid Colour. After 20-30 minutes air flash at 25'C. Please note: Substrates other than those stated should be tested before use, to ensure that the performance of the product is suitable for the intended use.
1 part Clear; 1-1.5 parts 921-00251 Two Way Thinner
For complete panel or overall respray apply 3 - 4 full even coats. Air flash between coats.
For part panel or spot repair, apply as for complete panel, extending each coat beyond the edge of the previous coat.
Add up to a further 50% thinner to aid blending.
Flash Off at 20 degrees 3-4 mins between coats at 20 degrees.
Air Dry @ 20'C; Dust Free 10-15 minutes at 20'C. Compound 6 hours at 20'C.
Please Note: Drying times will need to be extended under cooler conditions. Seek further advice before spraying.