If you know the colour you are after, put all the colour information (colour code, etc) we need to mix it up for you in the Notes section at Checkout. If you are unsure please get in touch with us.
A high opacity acrylic lacquer topcoat which requires minimal compounding to provide a full depth gloss finish. It has excellent adhesion over correctly prepared original finishes and PPG acrylic lacquer primers.
Substrates and Preparation:
Dulon Solid Colour can be applied over suitably prepared:
- Original sound paint finishes except spraying enamel
- 1K CT Etch Primer over-coated with any PPG acrylic lacquer primer
- Any PPG acrylic lacquer primer
Products:
Dulon Thinner 922-34178
Retarder 922-05158
Mixing Ratio:
Dulon Solid Colour (526- range) 1 part
Thinner 1-1.5 parts
Spray Viscosity:
12 - 14 seconds (DIN 4) at 25'C
Spraygun Settings:
| Conventional | HVLP |
| Gravity | 1.5 - 1.8mm | 1.4 - 1.6mm |
| Suction | 1.8 - 2.0mm | |
| Spray Pressure | 300 - 380 kPa | 10psi at cap (70kPa) |
Application:
Apply 4-6 single coats, Air flash between coats.
For spot repairs, extend each coat well beyond the edge of the previous coat. Thin a further 50% with Dulon Thinner when blending out.
Flash Off (at 25'C): 2-3 minutes between coats.
Drying Times: Air Dry at 25'C
Dust Free: 10 - 15 minutes at 25'C
Compound: 6 hours at 25'C
Drying times will need to be extended under cooler conditions.
Denibbing and Polishing:
Allow at least 6 hours air dry, preferably overnight drying before compounding.
