Paint Stripper 5 Litre
Removes epoxy paints, powder coatings polyurethanes, acrylic enamels, anti-fouling, conventional air-dry and baked alkyds. Contains Phenol.
Instructions for use:
Ensure adequate protective clothing such as gloves, overalls and safety glasses are used. Indoor use requires good ventilation. Do not apply to hot surfaces or in direct sunlight.
Open container cautiously to release pressure and begin application by spraying with non-atomising airless spray equipment or by daubing with a brush. Allow to dwell until paint is loosened and remove with a strong jet of water (avoid back splatter). Alternatively scrape off wrinkled film with a paint scraper and collect removed paint and stripper in newspaper.
Tergostrip Brush On contains a wax evaporation retarder, therefore wipe stripped surfaces with a rag soaked in mineral turpentine or xylol prior to repainting.
Coverage: 2-4 square metres per litre.
- Specific Gravity: Approximately 1.25
- Viscosity: 6,000-10,000cps @ 20oC
- Flash Point: Nil
- Coverage: Smooth substrate: 4m2 per litre
- Porous substrate: 2m2 per litre
N.B. Viscosity may be adjusted by addition of Tergostrip DP to thin (i.e. a 1:1 mixture of Tergostrip Brush On and DP will cover and penetrate horizontal surfaces such as roads and runways more effectively).