Delfleet Factory Pack CT White 4 Litre

Delfleet Factory Pack CT White 4 Litre

DELFLEET

  • $256.16
    Unit price per 
Shipping calculated at checkout.


416 line, Delfleet 350 is a high performance acrylic polyester urethane topcoat system specially designed for commercial and public service vehicles. It is particularly recommended for applications where a high degree of chemical resistance is required. The Delfleet 350 technology combines outstanding appearance and durability with easy application on large surfaces. The complementary Delfleet range of hardeners and thinners allows the spraying characteristics of Delfleet 350 to be varied to suit different application methods and conditions. 

Delfleet 350 Mixed Colour F3xxx Tinters 
Delfleet Binder F3160 
Delfleet MS Hardeners F3255, F3265, F3258 
Delfleet Thinners F3335, F3325, F3315, F3370 
DG Fade-out Thinner D868 
2K Accelerator F3431 
For matt & satin finishes or painting of flexible substrates: Delfleet Matting Base F3118 to create a matt or satin appearance; Deltron Plasticiser D814 to plasticise finishes over a flexible substrate

Preparation of Substrate:
PPG 2K Primers & Sound 2K finishes: P320-P400 dry
Before and after any sanding operation, the substrate must be thoroughly degreased using D845 or D837. Use D837 only prior to any painting.

Application Guide:

Mixing Ratio:

Conventional Pressure Airless
Mixed Colour 2 vol 2 vol 2 vol
MS Hardener 1 vol 1 vol 1 vol
Thinner 0.5 vol 0.3 vol 0.1-0.4 vol


Choose MS Hardener and Thinner according to application temperature and size of vehicle:

MS Hardener Thinner
Up to 18'C F3255 F3335 / F3325
18'C - 25'C F3265 F3325
25'C - 35'C F3265 F3325 / F3315
Over 35'C F3258 F3315 / F3370


Drying time may be further reduced by the use of Accelerator F3431

Potlife at 20'C: 8 hours

 

Conventional Pressure Airless
Spray Viscosity: 15-17 secs (15 for optimum flow) DIN4/20'C 15-17 secs DIN4/20'C 20-22 secs DIN4/20'C
Spraygun Setup: 1.3 - 1.8mm 1.0 - 1.1mm 0.7 - 0.9 max 11/50'
Spray Pressure - HVLP/RP: 2-3 bar 2-3 bar 48-144 bar
Spray Pressure - Conventional: 45 - 55 PSI
300-380 KPA
45 - 55 PSI
300-380 KPA
Number of Coats: 1 medium wet,
1 full wet
1 medium wet,
1 full wet
1 fast,
1 medium


Flash Off at 20'C:

Between Coats: 10 minutes
Before Stoving: Bake immediately

 
Drying Times:

Dust Free 10-20 minutes
Through dry at 20'C 24 hours
Through dry at 60'C 40 minutes
Through dry at 70'C 30 minutes
IR Medium 10 - 15 minutes

* Stoving times are for quoted metal temperature. Additional time should be allowed in the stoving schedule to allow metal to reach recommended temperature. 

Total Dry Film Build:

Conventional Pressure Airless
Minimum 45um 45um 45um
Maximum 60um 60um 70um


Theoretical Coverage:
Conventional: 8 - 9.5 m sq/L
Pressure: 9 - 10 m sq/L

Sanding: Grade Wet P600 - P800 | Grade Dry P320 - P400

Recoat Time:

  • Minimum: 18 hours 20'C or 40 minutes at 60'C
  • 7 days maximum without sanding
  • Surfaces which have been polished must be degreased then sanded prior to recoating


Polishing:
Low Bake or IR Force Drying: Minimum 1 hour after cooling
Air Drying at 20'C: Minimum 20 hours after application