4OZ GRAY - NEW SIZE
POR-15 Rust Preventive Coating is a high performance coating designed for application directly on prepped rusted or seasoned metal surfaces and will stop rust permanently
POR-15 Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust
POR-15 Rust Preventive Coating is an effective anti-corrosive and rust preventive coating that offers superior chemical resistance due to its dense, cross-linked molecular composition and non-porous attributes.
The secret lies in POR-15 Rust Preventive Coating's curing process. Most paints dry through evaporation, but POR-15 Rust Preventive Coating dries faster when moisture is present. It has the opposite chemistry of ordinary paints.
Now add to that POR-15 Rust Preventive Coating incredible hardness, toughness, and flexibility and you have a coating that is practically indestructible.
POR-15 Rust Preventive Coating is a permanent rust repair great for auto frame and chassis restoration, protecting valuable equipment against rust and corrosion.
Use POR-15 to protect expensive and valuable equipment against rust and abrasion.
POR-15 also has excellent "surface tolerance" which means it works very well on porous surfaces.
Use POR-15 Cleaner Degreaser and POR-15 Metal Prep to properly get your surface ready for the POR-15 Rust Preventive Coating. You'll be amazed at the toughness!
Features:
- 4oz covers approx. 12 sq. ft. (single coat)
- Double the solid content of most paints
- Compatible with all paint systems
- Tested over 450°F / 232°C
- Exceeds 2000 hours salt spray test
- Self-leveling
- Hammer tough
- Single Component
- Dries faster in humid conditions
- Repels all fuels and oils
- Resistant to most acids and alkalis
Applications:
- Automotive - chassis, doors, floors, trunk areas, suspension, engines and fuel tanks
- Industrial - heavy equipment, truck components, trailers, fuel storage, rebar, steel forms, concrete, storm gates, transformers
- Marine - decks, bilges, hulls, pipes, chain lockers, masts
- Also excellent for sealing and repairing fiberglass
Size: 4oz = 236mL
Downloads:
Technical Data Sheet - POR-15 Rust Preventive Coating
Safety Data Sheet - POR-15 Rust Preventive Coating Gloss Black
STRUCTURAL STRENGTH MEASURES
ASTM C-580 Flexural Strength - measures flexural strength and modulus of elasticity. 5,200 pounds per square inch
ASTM C-579 Compressive Strength - measures compressive strength, the capacity of axially directed pushing forces. 12,500 pounds per square inch - Verified. Not tested to failure.
ASTM C-307 Tensile Strength - measures the tensile strength of cured chemical-resistant materials. 3,200 pounds per square inch
ASTM D-4541 Bond Strength To Concrete - measures the strength of coatings bond to concrete. Concrete fails before POR-15 Rust Preventive Coating. It far exceeds the tensile strength of concrete
ABRASION RESISTANCE
ASTM C-501 Taber Abraser- abrasive wear by determination of the loss of weight resulting from abrasion. In two separate tests, POR-15 Rust Preventive had:
- No loss after 1,000 cycles with a 1,000 gram abraser
- Loss after 10,000 cycles with 1,000 gram abraser = 0.09 grams
-
WEATHER RESISTANCE
Weatherometer - accurate weather resistance indicator of cycling of conditions. The cycle is 30 mins sun at 135 degrees F, 30% relative humidity and 30 mins dark at 75-80 degrees F, 100% relative humidity 1,000 hours of exposure equals 5 years of simulated exposure in the Rocky Mountain region. There was no change in the 3 panels coated with POR-15 Rust Preventive Coating exposed for 2,000 hours.
ASTM B-117 Salt Spray - specimens are exposed at specific locations and angles. It creates a 100% relative humidity condition in the exposure zone.
Two separate B-117 tests. One with new bare steel and the other with rusted steel. Both were coated with POR-15 Rust Preventive Coating.
- No change in 3 panels of new steel exposed for 250 hours at 98 degrees. Thickness = 2 mils
- No change in 3 panels of rusted steel exposed for 1000 hours at 98 degrees. Thickness = 2 mils
-
CHEMICAL RESISTANCE
Chemical Bath Test - After 200 hours of soaking in the following chemical bathes, panels coated with POR-15 Rust Preventive Coating experienced no changes: 10% hydrochloric acid, 50% sulphuric acid, 55% chromate, 85% phosphoric acid, 10% sodium hydroxide 98% methanol.
Raw Sewage Test - A metal box that houses a filter for raw sewage in a treatment facility was coated with POR-15 Rust Preventive. After a year of service, no viable undercutting or rusting was present on the housing.
-
IMPACT, POROSITY, AND TEMPERATURE TESTS
Mil-D-3134J Impact Resistance - POR-15 Rust Preventive Coating exceeds standards.
ASTM C-413 Water Absorption - method covers the determination of the absorption of chemical-resistant mortars, grouts, monolithic surfacings, and polymer concretes. 0.0001 maximum
NACE Stand TM0174 - 0.00 POR-15 Rust Preventive Coating is a non-porous coating.
Temperature Resistance - POR-15 Rust Preventive Coating is temperature resistant up to 450° continuously. A test showed that no adhesion was lost at 450° F for 10 hours.
