2 Litre Dulon Clementine #218
A high opacity acrylic lacquer topcoat which requires minimal compounding to provide a full depth gloss finish. It has excellent adhesion over correctly prepared original finishes and PPG acrylic lacquer primers.
Substrates and Preparation:
Dulon Solid Colour can be applied over suitably prepared:
- Original sound paint finishes except spraying enamel
- 1K CT Etch Primer over-coated with any PPG acrylic lacquer primer
- Any PPG acrylic lacquer primer
Products:
Dulon Thinner 922-34178
Retarder 922-05158
Mixing Ratio:
Dulon Solid Colour (526- range) 1 part
Thinner 1-1.5 parts
Spray Viscosity:
12 - 14 seconds (DIN 4) at 25'C
Spraygun Settings:
|
Conventional |
HVLP |
| Gravity |
1.5 - 1.8mm |
1.4 - 1.6mm |
| Suction |
1.8 - 2.0mm |
|
| Spray Pressure |
300 - 380 kPa |
10psi at cap (70kPa) |
Application:
Apply 4-6 single coats, Air flash between coats.
For spot repairs, extend each coat well beyond the edge of the previous coat. Thin a further 50% with Dulon Thinner when blending out.
Flash Off (at 25'C): 2-3 minutes between coats.
Drying Times: Air Dry at 25'C
Dust Free: 10 - 15 minutes at 25'C
Compound: 6 hours at 25'C
Drying times will need to be extended under cooler conditions.
Denibbing and Polishing:
Allow at least 6 hours air dry, preferably overnight drying before compounding.
