Concept Plastic Primer (Silver) is a ready for use primer. Easy to apply and is specifically designed to adhere to all plastic auto parts.
Concept Plastic Primer is a general, easy to apply primer, formulated and characterised by excellent adhesion to most commonly used plastic surfaces as a sound foundation for topcoats. It is suitable for use under the Concept 2K product range, Concept No Mix,
Concept 900 2K Basecoat, Concept Unicryl 3000 and Concept Unicolour 300.
Properties
Ready to use
Easy to apply
Substrates
ABS, PP/EPDM, PP, TPO, SAN, PC, PA, PUR-RIM, R-TPU, PPO, PBT, PUR, SOFT
FOAM, UP-GF
Glass reinforced polyester (GRP), thoroughly sanded and cleaned
Note: Not suitable for vinyl upholstery.
Substrate Preparation
All Substrates, Wipe all plastic surfaces with warm soapy water then
sand area with scotch brite.
Clean all areas to be painted with Concept Antistatic
Cleaner before application of Concept Plastic Primer.
Reducer Not required – product supplied ready to use.
Number of coats 1-2
Apply one or two even coats, maximum
Avoid heavy wet coats.
Dry Film Properties After 7 days drying,
when compared to similar technology products.
Flexibility Excellent
Adhesion Excellent
