CONCEPT PAINTS HS 2K PRIMER (HIGH BUILD) GREY 4L - There are actually two undercoats systems in this high build Two Component Primer. Its unique formulation ensures that there's no need to apply a putty and a primer over a prepared surface - the only product that's needed is Concept HS 2K Primer (High Build). This product has excellent Film Build, Adhesion and Rust inhibiting properties and is easy to sand.
PRODUCT AND ADDITIVES Concept HS 2K Primer (High Build) • Concept Primer Hardener • Concept Primer Hardener - Fast • Concept 2K Thinner Range.
SUITABLE SUBSTRATES Sound existing finishes. • Aluminum surfaces primed with Concept 1K Etch Primer. • Steel surfaces primed with Concept 1K Etch Primer. • Polyester spray filler. • Glass reinforced polyester.
MIXING RATIO,4 parts Concept HS 2K Primer (High Build) by volume. • 1 part Concept Primer Hardener by volume. • If needed a 10 - 20% reduction can be made with Concept 2K Thinner.
SPRAY GUN AND PRESSURE,2.0mm tip with a suction feed gun • Pressure is 350 – 450 kPa. (The same condition applies for gravity feed)
APPLICATION, Stir thoroughly before use. • All surfaces must be thoroughly sanded and cleaned with Concept Wax & Grease Remover prior to application. Lightly rusted surfaces must be treated with Concept Light Rust & Metal Conditioner. • Two to three, even coats are needed to obtain a 50 - 80 Micron Dry Film Thickness. 100 microns can be obtained after three to four coats.
SPRAYING VISCOSITY: • 25 - 27 seconds B4 cup at 25°C.
FLASH-OFF TIME: • 5 minutes between coats at 25°C
DRYING: 3 - 4 hours at 25°C for a Dry Film Thickness of 50 – 80 Micron. • 16 – 24 hours at 25°C for a Dry Film Thickness of 100 Micron. • Low Bake for 30 - 40 minutes at 50°C.
SANDING: Wet sand thoroughly with either P600 - P800 before applying finish coat.
COVERAGE: 5 m²/L @ 80 Micron Dry Film Thickness.
POT LIFE: 2 - 3 hours at 25°C
Shipping & Delivery
Orders will be shipped by couriers. Orders received before 1pm will be sent out same day.
If there are items missing we will send what we have with a note of when the rest of the order will be shipped or you will be offered a refund.
In some cases we ship from different locations, if this is the case you will be sent an email telling you of this.
We cannot ship out internationally outside of New Zealand.
Goods ordered which are either faulty or not as ordered may be returned for a full refund. This must be within a reasonable period.
This included goods which:
- are or become faulty through no fault of your own
- are not fit for a stated purpose or a purpose you made known to our sales staff
- don't match our description or sample (please note that some product pictures may not be of the actual product size - manufacturers supply us with a single product image to cover a range of package sizes - and that the size, volume or weight stated in the product description is what you will get)
- have defects that were not obvious or we did not bring to your attention.
Please ring us beforehand to get a Returned Merchandise number and instructions on how to return goods to ensure a speedy resolution.
IF YOU CHANGE YOUR MIND:
Sealed and undamaged items may be returned for a refund or account credit, but you will have to pay the shipping costs. Please ring our customer service centre (04-5866681) before sending anything back.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.