RISLONE POWER STEERING REPAIR 500ml

Rislone High Mileage “Kilometre” Power Steering Repair

Stops Leaks • Reduces Noise • Restores Steering Performance

Rislone High Mileage Power Steering Repair is a specially formulated dual‑chamber treatment designed to fix the most common power steering problems caused by worn seals, ageing fluid, and high kilometres. In many cases, it can save you from expensive steering rack or pump repairs.

Key Benefits

• ✅ Reduces noise and smooths hard or rough steering
• ✅ Stops and prevents power steering leaks
• ✅ Reconditions seals and O‑rings
• ✅ Restores performance in worn systems
• ✅ Adds extra lubrication and system protection

How It Works

This advanced formula repairs leaks and performance issues in two important ways:

1. Seal Restorer Additives
   Rejuvenate dried, shrunken seals by restoring flexibility and elasticity caused by age, heat, and high kilometres.

2. Seal Polymer Technology
   Builds a protective polymer film around seals and O‑rings while filling small grooves worn into shafts, reducing internal fluid bypass.

Vehicle Compatibility

• Suitable for all vehicles – domestic & import
• Works with rack & pinion and gearbox systems
• Compatible with all power steering fluids and ATF, including:
  • Petroleum-based
  • Mineral oil
  • Synthetic formulations

Directions for Use

Adding to Existing Power Steering Fluid

1. Locate the power steering reservoir (usually near the belt-driven pump).
2. Check fluid level using the dipstick.
3. If fluid is low, add equal amounts from both chambers of the bottle.
   • Use at least half the bottle
   • Do not overfill
4. Replace dipstick and drive 5–10 minutes to circulate fluid.

Results: Immediate or noticeable within 2 days or up to 150 km of driving.

Tip: If reservoir is near full, siphon some fluid first to prevent overfilling.

When Changing Power Steering Fluid

1. Drain old fluid.
2. Add entire bottle of Rislone Power Steering Repair.
3. Top up with manufacturer‑recommended fluid.
4. Drive vehicle and recheck fluid level.

Dosage Guide

• 1 bottle treats 2–3 litres of power steering fluid
• Smaller systems (0.4–0.9 L): use ½ bottle
• Larger systems: use 1 bottle per 2.5 litres

Common Problems It Helps Fix

• Power steering fluid leaks
• Hard steering when cold (“morning sickness”)
• Noisy or whining power steering pumps
• Rough, tight, or inconsistent steering feel
• Fluid leaking into rack & pinion bellows

Frequently Asked Questions (Quick Answers)

Will it work in my vehicle?
✔ Yes. Compatible with all power steering systems and fluids.

Can I use a second bottle?
✔ Yes, especially for severe leaks. A fluid change is recommended before reapplication.

Will it damage my system?
✔ No. Safe for all seals, pumps, racks, and hoses.

Can I just top off if my fluid isn’t very low?
✔ Yes. For minor leaks, topping off works well. Use at least half a bottle for performance issues.

Why Power Steering Problems Happen

As vehicles age and accumulate kilometres:

• Seals dry out and shrink
• Fluid breaks down
• Pumps become noisy
• Valves stick and internal leaks develop

Rislone Power Steering Repair revitalizes seals, improves lubrication, and extends the life of the entire steering system.